Thompson Construction and Engineering
Design, detailing Prosteel software, fabrication and erection of steelwork. Also have a concrete tilt panel division, carpentry division and onsite construction teams
| Physical Address | 9b Meadow Road, Washdyke, Timaru (map) | ||
| Postal Address | PO Box 2081, Washdyke, Timaru, 7941 | ||
| Phone | 03 688 7164 | Mobile | 027 440 0247 |
| admin@thompsonengineering.co.nz | Website | www.thompsonengineering.co.nz | |
| Fax | 03 688 7168 | Contact | Michelle Thompson |
Project Capability
The Project Capability table indicates categorisation of the company in terms of the work it considers it can execute technically, and classification of the company in terms of the maximum size of project contract that it has previously handled.
| Heavy industrial plant structures |  |
| Multi storey >3 levels | |
| Large span portals >30m | |
| Medium/small span portals | |
| Large span trusswork | |
| Major tubular steelwork | |
| Towers | |
| Architectural metalwork | |
| Frames for machinery, supports for conveyors, ladders and catwalks | |
| Grandstands and stadia | |
| Small fabrications | |
| Pedestrian bridges | |
| Short span road or rail bridges <18m | |
| Long span bridges | |
| Residential steelwork | |
| Project Tonnage | up to 200 |
| Project Contract Value | up to $5,000,000 |
Note: The steelwork project contract value for a company is intended to give guidance on the size of steelwork contract that has been undertaken; where a project lasted longer than a year, the value is the proportion of the steelwork contract undertaken within a 12 month period. Contract value is primarily steelwork but may include associated works.
Equipment and Services
| CNC Beam Line | |
| CNC Cutting - Oxy, Plasma | |
| CNC hole drilling or punching | |
| Crane: Mobile <= 10t | |
| Crane: mobile > 10t | |
| Cranes: Overhead <= 5t per bay | |
| Cranes: Overhead > 5t per bay | |
| Cutting Mechanical: Saw, Cropper, Guillotine | |
| Plate Rolling | |
| Section Rolling | |
| Welding: Non-Ferrous | |
| Welding: On-Site | |
| Welded Beam Line | |
| Cold Cambering of Beams <450mm deep | |
| Cold Cambering of Beams <620mm deep | |
| Steel Erection | |
| 3D Steel Detailing Modelling | |
| General Steel Detailing | |
| Wire brush and prime | |
| Grit-blasting and architectural coatings | |
| Intumescent coatings |
Employment
Thompson Construction and Engineering offers the following programs:
| Gateway school students | Work experience school students | Modern apprenticeships | STAR |
|---|---|---|---|
 | | | |
